HG11-N OMCH

HG Dual-Display Fiber Optic Amplifier

Project

General-purpose

NPN output

HG11-N

HG11-P

Light intensity

100% adjustable

Light source (light-emittingwavelength)

Red light-emitting diode (660nm)

Power supply

DC10~30V [with the pulse (P-P) 10%]

Current consumption

The following 35mA

Output Control

DC35-voltage power load below below 100mA load current (voltage to remain below IV)open-collector outout type(NPN/PNP output varies as a resultof the form) to light when the ON/ shading ON when the switch-conversion

Response time

Reset action, the following 200us

Sensitivity Adjustment

8 rotary knob without end (with indicator)

Protection circuit

Protection against the power connection,output short circuit protection to prevent interference function

Lighting

Smooth by the light, incandescent;3000rx below, following the sun 10000rx

Ambient temperature

When action:-25~ +55°C,save time:: -25 ~ +55 C(there can not be frozen, the phenomenon of condensation)

Surrounding humidity

35 – 85%RH, Save: Save time:35 – 95%RH (can not have the phenomenon of condcnsation)

Insulation resistance

20m Q above (DC500MV to trillion dollars)

Voltage

AC1,000V 50/60Hz 1min

Vibration(durable)

10 – 55Hz complex amplitude 1.5mm X,Y,Z direction of the 2h

The impact of(durable)

500m/s2 X, Y, Z direction of the 3rd

Protection of the structure

IBC standard IP50 (when the installation of protective cover)

Connection

Open-wire leads (standard long line 2m)

Weight (in packing cases)

100g

Materials

Shell

ABS Heat-resistant ABS

The protective shield

Polyester