4V100 Series Solenoid Valve OMCH

4V100 Series Solenoid Valve – Technical Specifications

1. Before use, check the components for any damage that may have occurred during shipping, then install and use them;
2. During installation, ensure the gas flow direction and pipe thread type are correct. The working fluid must be filtered through a 40-micron filter element;etc.), then install and use them;
3. Ensure that the installation conditions meet the technical requirements (such as “voltage,” “operating frequency,” “working pressure,” and “operating temperature range”
4. During installation, pay attention to the direction of gas flow: P is the inlet, A (B) is the working port, and R (S) is the exhaust port;
5. Avoid using the unit in vibrating environments whenever possible, and take measures to prevent freezing at low temperatures;
6. When connecting piping, ensure that the sealing tape does not extend beyond the threaded end face of the fitting. Be sure to remove dust, metal shavings, and otherto prevent impurities or foreign objects from entering the valve body;
7. Take precautions against dust; it is recommended to install a silencer or a silencer-throttling valve on the exhaust port. When the unit is removed and not in use, install dust coverson the inlet and outlet ports.
8. During system commissioning, it is recommended to first perform testing using the manual operation mechanism, followed by power-on testing.